The built-in gas fireplaces of the STYLE series have a closed combustion chamber. The combustion gases are exhausted through an exhaust system in the wall (coaxial venting) and the combustion air is also drawn in from the outside.

Variants

Colour

Anthracite

Grey Metallic

Frame width

The built-in gas fireplaces of the STYLE series have a closed combustion chamber. The combustion gases are exhausted through an exhaust system in the wall (coaxial venting) and the combustion air is also drawn in from the outside. With an output of 7.2 kW, they are also suitable for larger rooms of up to 130 m³. STYLE fireplaces are equipped with a multi-speed fan, which achieves maximum thermal comfort in the heated space. The design of the combustion chamber, complemented by ceramic elements above the burner, allows a view of the blazing fire that is comparable to wood-burning fireplaces. Unlike conventional solid fuel fireplaces STYLE series gas fireplaces can thus be set to the desired room temperature, which the gas fireplace automatically maintains. A remote control is used for maximum operating convenience. The fireplaces are equipped with a thermostat, electronic ignition (i.e. without pilot light).

• Possibility to heat larger rooms up to 130 m³
• complete safety of operation
• Automatic maintenance of the set temperature
• the design of the fireplace allows you to watch the fire burning
• The fireplaces are manufactured on natural gas
• height x width (including frame): 630 x 950 mm

• Wi-Fi module can be connected to electronics (smart home, smart phone) - additional range at extra cost

955-99-13 Wifi module B6R-W2MR

No. 955-99-24 - Connection cable for Wifi module - cable 660-2CSW 1000

No. PS-K_2020 - wooden building penetration (adjustable) - additional assortment at extra charge

• the price of the fireplace includes the flue system: 1 pc pipe 1 m, 1 pc horizontal head

A condition for the warranty to be accepted is the installation and commissioning by a service technician with a valid certificate from Karma Český Brod a.s. and the original Karma flue system must be used - see the ACCESSORIES tab.

Remote control

• ECO mode
• Setting the desired temperature
• timing for switching the fireplace on and off
• manual flame height adjustment
• serves as a temperature sensor in the room
• fan speed options
• weekly programming mode

FOR INSTALLATION

The casing of the heat chamber within the building envelope that is intended to transfer heat and the insulation of adjacent structures should be made of materials that are directly designed for this purpose (e.g. liporo boards and fittings, expanded vermiculite boards, etc.).

Unsuitable materials such as aerated concrete, porocement, plasterboard, etc. should not be used. Unsuitable materials such as aerated concrete, porocement, plasterboard, etc. should not be used.

INSTALLATION OF FLUE SYSTEM

The original pipework supplied by the manufacturer must be used without fail. The dimensions of the pipe are 100 mm in diameter for the flue gas exhaust and 150 mm for the combustion air intake. Here are the permitted pipe combinations:

- The maximum length of the pipe is 5 m, if it is straight without elbows.
- If 90 elbows are used, then the total length of straight sections is a maximum of 4 m.

- If a 45 elbow is used, a total of 2 pieces.
– –A combination of 90° and 45° elbows cannot be used!

The price of the fireplace includes the flue system: 1 pc pipe 1m, 1 pc horizontal head

Energy label

Dimensional drawing

Possible installations of flue system

Weight (kg) 85

Rated heat output, max. (kW)   7,2

Rated heat output, max. (kW)   9,0

Heated space (m³) up to 130

Rated consumption - natural gas (m³/hr) 0,95

Safety fuse for flue gas discharge yes

Gas connection G1/2″

Electrical connection 230 V

Fan yes

Remote control yes

External dimensions (including hem) - h x w x h (mm) 350 x 861 x 517

Frame width (mm) 30

Exhaust diameter (mm) 100 / 150